Contact
Let's talk about your water
Tell us about your process or project. Our team in Bergen will get back to you.
Send an enquiry
The form above reaches a small technical team in Bergen — the engineers who specify the systems, not a call centre. Two lines are enough to start.
If you have numbers already, put them in the message; the first reply can then be a sizing. The sizing tool gives a starting figure, the pricing page explains what moves a quotation, and how we prove a result shows what a pilot measures.
What we need to quote
| What to send | Why it matters | If you do not have it |
|---|---|---|
| Flow through the loop | Picks the platform, 2 lpm to 1 000 m³/h | Tank volume and turnover |
| Dissolved oxygen now, and the target | The gap is the duty: a NanOxy Pro holds 40 mg/L at 18.9 m³/h | A week of probe logs |
| Water temperature and range | Warm water holds less oxygen; design for the summer peak | A rough range |
| What the water is doing today | Solids, biofilm or odour decide the stage: membrane, venturi or ceramic | A photograph |
| Retrofit or new build | A pumped loop is one job; space and power another | A sketch |
| Gas on site: oxygen, air, ozone | Gas supply often outweighs the machine | We cost both |
What happens after you get in touch
Four steps; stop at any of them.
-
01
An engineer reads it
Expect questions about your water before any numbers.
-
02
We work the oxygen budget
Flow, deficit, temperature and loop losses become a duty in kg per hour.
-
03
You get a specification
Model, gas supply, placement, and what gets measured.
-
04
Pilot, then production
Unusual water is proved on a pilot unit first.
Visit us in Bergen
NanoMAR AS is at Langenesvegen 34, 5258 Blomsterdalen, on the southern edge of Bergen. Specification, support and spares come from the same coast as the land-based aquaculture industry it serves.
Ask before you travel; the team is often on site.
Phone and email
contact@nanomar.no
Attach an analysis or a drawing and it reaches an engineer.
+47 913 06 012
Norwegian office hours. Best before you have numbers.
Who it reaches
The engineers who size and build the systems.
Frequently asked questions
- How do I get a quote from NanoMAR?
Send flow rate, current and target dissolved oxygen, temperature, and retrofit or new build to contact@nanomar.no. NanoMAR quotes per installation rather than publishing a list price.
- Where is NanoMAR based?
NanoMAR AS is a Norwegian nanobubble manufacturer at Langenesvegen 34, 5258 Blomsterdalen, Bergen, founded in 2023. A European supplier shares a time zone with your plant.
- Do I need a water analysis first?
No. Telling NanoMAR what the water is doing — low oxygen, high solids, biofilm, odour — is enough to start. We will say what to measure before sizing.
- Can I trial a nanobubble system before buying?
Yes. NanoMAR builds the portable NanOxy S2 at 2–50 lpm and the NanOxy M Pro pilot platform at 10–100 m³/h, so the technology is proved on your water first.
Send the numbers you have
Flow, dissolved oxygen now and the target, temperature, and what the water is doing.